All the scenariosQuotesElectrical Drawing ExtractionSimple
The main board's single-line diagram
The situation
The office receives board QG-1's single-line diagram and has to get its content into the system: title block, devices, ten circuits and the symbol legend. The title block prints no scale, and that has to stay blank rather than be inferred from the drawing.
The documents
The same files the agent was handed. Open them before you read the rest: the names, addresses and VAT numbers are invented, the structure is not.
What the agent does
The same four phases as every run, in order. In the console you watch them go by one at a time, with the credits beside them.
- 01DiagnoseReads the input and decides what the job actually is.
- 02AssemblePicks tools, data sources and the model you chose.
- 03ActDoes the work. Anything that leaves the building waits for approval.
- 04AssessChecks its output against your rules before settling credits.
The tools it used
Read off the recording of the run, not off a feature list.
- Read the document
- Read the drawing's components
- Tidy up the components
- Check the result
- Save the result
The result
- Drawing
- Schema unifilare quadro generale QG-1no. E-01 · rev. B
- Date
- Feb 10, 2026
- Scale
- -
- Sheets
- 1
Components
| Tag | Component | Qty | Rating | Location |
|---|---|---|---|---|
| MTC | circuit breakerC1, C2 | 2 | 10 A | quadro QG-1 |
| MTC | circuit breakerC3, C4, C5, C6, C9; C10 | 6 | 16 A | quadro QG-1 |
| MTC | circuit breakerC7 | 1 | 20 A | quadro QG-1 |
| MTC | circuit breakerC8 | 1 | 25 A | quadro QG-1 |
| kW | meterCliente n. 4471180 | 1 | Sbarra QG-1 | |
| IG-Sez | othertipo A (selettivo); raw label: Sezionatore generale 4P + differenziale | 1 | 4 P 40 A - Id 0,3 A | Sbarra QG-1 |
| Idn | RCDC3, C4, C5, C6, C9; C7 | 6 | 30 mA | quadro QG-1 |
Circuits
| Circuit | Description | Protection |
|---|---|---|
| C1 | Luci piano terra | MTC 10 A |
| C2 | Luci piano primo | MTC 10 A |
| C3 | Prese piano terra | MTC 16 A + Id 30 mA |
| C4 | Prese piano primo | MTC 16 A + Id 30 mA |
| C5 | Cucina - prese dedicate | MTC 16 A + Id 30 mA |
| C6 | Lavatrice / lavastoviglie | MTC 16 A + Id 30 mA |
| C7 | Condizionamento (3 unità) | MTC 20 A + Id 30 mA |
| C8 | Forno / piano cottura | MTC 25 A |
| C9 | Autoclave locale interrato | MTC 16 A + Id 30 mA |
| C10 | Riserva | MTC 16 A |
Legend
- kWh — Contatore di energia (kWh)
- — — Interruttore magnetotermico (MTC)
- Id — Differenziale (RCD) 30 mA tipo A
- x4 — Sezionatore generale 4P + differenziale
real time 2 min 45 s29 creditsOpen the report (PDF)
Minute by minute
- 0 sDiagnose0 credits
- 4 sAssemble1 credit
- 9 sAct0 credits
- 11 sToolRead the document0 credits
- 11 sAct0 credits
- 12 sActRead the drawing's components0 credits
- 12 sToolRead the drawing's components0 credits
- 18 sAct1 credit
- 21 sToolTidy up the components0 credits
- 21 sAct1 credit
- 27 sToolCheck the result0 credits
- 27 sAct1 credit
- 33 sToolSave the result0 credits
- 33 sAct1 credit
- 39 sAssess9 credits
- 1 min 26 sAct1 credit
- 1 min 32 sToolCheck the result0 credits
- 1 min 32 sAct1 credit
- 1 min 38 sToolCheck the result0 credits
- 1 min 38 sAct1 credit
- 1 min 45 sToolCheck the result0 credits
- 1 min 45 sAct1 credit
- 1 min 58 sAct1 credit
- 2 min 3 sToolSave the result0 credits
- 2 min 3 sAct1 credit
- 2 min 8 sToolSave the result0 credits
- 2 min 8 sAct1 credit
- 2 min 14 sAssess6 credits
What to look for
The title block's number, revision and date, ten circuits from C1 to C10 and seven device rows for eighteen pieces in all. The scale stays absent: the sheet does not print one.